FEATURES
- ATEX Zone 2 / CE conformity
- ATEX material level / temperature highest possible
- 100% compressed air operation, intrinsically safe
- Master / slave option for two pumps
- Control box, quick connect / disconnect with indicators for easy diagnostic / visual of operation
- No internal workings, minimal maintenance
- Manual or fully automatic operation
- Throughput capacity up to and in excess of 45 m3/hr (198USGPM) @ SG1.0 depending on the materials and distances involved
- Generates 25”Hg+ (85kPa) vacuum using 600cfm (284 L/sec) jet pack and requires 750 cfm (354 L/sec) using air assisted discharge option at minimum 95psi (6.5 bar) to 115psi (7.9 bar) at the pump
- 100mm (4”) Vacuum Load
- 250mm (10”) top load / gravity feed with 100mm (4”) vent
APPLICATIONS
- Capture and transfer of drill cuttings
- Slurry transfer• Thickener de-sludging
- Mud and tailings transfer
- Pit and sump cleaning
- Hazardous waste recovery
- Oil sludge and tank bottoms residue transfer
- Tank Cleaning and sludge extraction
- Vacuum cleaning or barge and vessel bottoms
- Heavy crude transfer
- Bulk transfer, load and unload
TECHNICAL DATA
- Height 174 cm (69”)
- Width 110 cm (44”)
- Length 209 cm (83”
- Weight 860 kg (1896 lb)
- Air consumption 600 cfm (284 L/sec) jet pack and requires 750 cfm (354 L/sec) using air assisted discharge option minimum 95psi (6.5 bar) to 115psi (7.9 bar) at the pump
- Air supply connection 50 mm (2”)
- Up to 25”Hg+ (85kPa) vacuum
- Suction 100 mm (4”) BSP/Type B camlock
- Discharge 125 mm (5”) Victaulic
- Top load gravity feed 250 mm (10”) flange connection AS2129 Table E
- 100mm (4”) top load / gravity vent
- 100mm (4”) Vacuum Load
- Handles solids to 70 mm (3”)
- Carbon steel vessel
