Fluimac is a young and dynamic company, specializing in the design and manufacturing of innovative next-generation solutions of air operated diaphragm pumps (AODD) and ancillary products. Manufactured in Italy, FLUIMAC’s ‘Phoenix’ range of air operated diaphragm pumps are cost effective and recognized as the most flexible pumps in the industry handling difficult liquids at relatively low pressures and flows.
Diaphragm pumps
P1000 Diaphragm pump
TECHNICAL DATA
- Fluid connections: 3” BSPP-DN 80
- Air connection: 3/4” BSPP
- Max. Flow rate: 1050 lt/min
- Max air pressure: 8 bar
- Max delivery head: 80 m
- Max Suction Lift Dry: 5 m
- Max Suction Lift Wet: 9,8 m
- Max Solid passing: 12 mm
- Noise level: 82 dB
- Max Viscosity: 55.000 cps
- Displacement per Stroke: 9750 CC ~
II 3/3 G Ex h IIB T4 Gc
II 3 D Ex h IIIB T135°C Dc X
Displacement per stroke may vary based on suction condition, discharge head, air pressure and fluid type.
DIMENSIONS
| A | B | C | Net Weight | Temperature | |
|---|---|---|---|---|---|
| PP | 780 mm | 417 mm | 1024 mm | 62 kg | -4 °C | + 65 °C |
| PVDF | 780 mm | 417 mm | 1024 mm | 77 kg | -20 °C | + 95 °C |
| ALU | 710 mm | 417 mm | 940 mm | 84 kg | -20 °C | + 95 °C |
| SS | 672 mm | 417 mm | 946,5 mm | 122 kg | -20 °C | + 95 °C |
COMPOSITION
| MODEL | CASING | DIAPHRAGM | BALLS | SEATS | GASKET | CONNECTIONS | ATEX | PORTS |
|---|---|---|---|---|---|---|---|---|
| P1000 | P = PP KC = PVDF+CF S = SS A = ALU |
HT = HYTREL+PTFE MT = SANTOPRENE+PTFE H = HYTREL W = SANTOPRENE H.R. D = EPDM N = NBR |
T = PTFE S = SS D = EPDM N = NBR |
P = PP K = PVDF S = SS Z = PE-UHMW |
D = EPDM V = VITON N = NBR T = PTFE |
1 = BSP 2 = FLANGED 5 = NPT |
– = zone 2 | AB = STANDARD |